Long Arm Cross Hatch Guide:

The Cross Hatch Guide is normally cut to order and in doing so, we are happy to engrave your name or your business name into the guides. You can call us on (03)97370059 for more details on this wonderful tool.

45, 60 and 90 degrees both left and right make cross hatching a pleasure. It comes with a 3” wide x 22” long straight Guide. There are currently 14 accessory guides with a wide range of curves, waves and clamshells available to use with this tool.

This tool requires about 1 minute to set the angle and it is ready to use. The Black Fence is placed against the rolled quilt near the neck of the Long Arm Machine and with minimal pressure you can use the guide to stitch your cross hatch lines. The tool is not locked down and does not require any marking on the quilt.

The Guide enables complete flexibility when working around appliqué’ while maintaining true cross hatch lines. The Laser cut lines in the Guides will allow you to keep the cross hatching accurate.

The Guides, in lengths 16” and 22” are all priced the same. They are 3/8” thick.
The Guide length can be quickly determined by the size of the working area you have, (Bed size) Refer to the two examples shown below. Quilting tables that have the TAKE UP roll above the table will need to be measured.

*The Long Arm Cross Hatch Guide is required to use the following accessories

16" and 22" guides are $59.00 AUD each

Guide No.1 - 3" Straight edge   Guide No.3 - 4" Clamshell & 4" x ½" Wave   Guide No.5 - 2"x2" Deep Wave & 1"x½" Wave   Guide No.7 - ½" Double Curve & 3"x2" Wave   Guide No.9 - 3"x1 ½" Wave & 4"x1"Wave

Guide No.2 - 3" Clamshell & 3"x½" Wave   Guide No.4 - 4"x2" Wave & 4"x½" Curve   Guide No.6 - 3" Ocean Wave & 3"x½" Wave   Guide No.8 - 4"x½" Wave & 2"x1" Wave   Guide No.10 - Large Clouds 1"x¼" Wave

Guide No.11 - Small Clouds & 3"x¾" Wave Guide No.13 - Double 2½" Curve & 1"x1" Wave   Guide No.15 - 2" Clamshell & 2"x ½" Wave

Guide No.12 - Double 2" Curve & 2"x¾" Wave Guide No.14 - 1" Clamshell & 2"x1½ Wave