We manufacture all of our straight guides used with Cross Hatch Guide from 8mm thick Cast Acylic. You will never have incidents with your hopping foot stepping up onto the template.
The Cross Hatch Guide is normally cut to order and in doing so, we are happy to engrave your name or your business name into the guides. You can call us on (03)97370059 for more details on this wonderful tool.
45, 60 and 90 degrees both left and right make cross hatching a pleasure. It comes with a 3" wide x 22" long straight Guide. There are currently 14 accessory guides with a wide range of curves, waves and clamshells available to use with this tool.
This tool requires about 1 minute to set the angle and it is ready to use. The Black Fence is placed against the rolled quilt near the neck of the Long Arm Machine and with minimal pressure you can use the guide to stitch your cross hatch lines. The tool is not locked down and does not require any marking on the quilt.
Create an endless variety of shapes with our optional accessories
The Guides, in lengths 16" and 22" are available in 6mm or 8mm thick Clear Cast Acrylic. The Guide length can be quickly determined by the size of the working area you have, (Bed size) Quilting tables that have the TAKE UP roll above the table will need to be measured. *The Long Arm Cross Hatch Guide, (black fence) is required to use the following accessories, or they can be used as a floating template. Please feel free to call me on 03 97370059
Some Guides are machine specific, please include you phone number on your order. Default size is for a 1/2" hopping foot